Brunsmen Lan Cable

1000ft 0.50BC 4 Pair Twisted CAT5E FTP Ethernet Lan Cable 

Regarding the standard of Ethernet Cable, there is no so-called national standard for bulk Network Cable, only classification: Cat5e FTP Lan Cable, Cat5E Cable has low attenuation, less crosstalk, and has a higher attenuation to crosstalk ratio (ACR) and Signal-to-noise ratio (Structural Return Loss), smaller time delay error, performance is greatly improved. Category 5e cable is mainly used for Gigabit Ethernet (1000Mbps). Category 5 is about 0.5mm. In addition to the thickness of the wire, there is also the quality of copper.

CAT5E Lan Cable Product Information:

1. Frequency – 100 MHz2. Transmission Speed – 1000BASE-TX

3. Available Length – 305M ( 1000ft )

4. Condcutor- 24AWG (1/0.5) (America wire gague), bare copper

5. Cable Construction – Shielded Or Unshielded 6. Jacket- PVC or LSZH or PE

7. Working Temperature: -15℃~+75℃

8. Install – Used indoor, in-wall and in the ceiling or Outdoor

Applications: Computers, routers, VoIP phones, IP cameras, printers, gaming consoles, routers, ethernet extenders, switch boxes, PoE, devices, etc..

Unshielded Cat6 Network Cable often use the method of increasing the distance between the cores and non-metallic fillers to reduce alien crosstalk. Therefore, the diameter of unshielded CAT6 Lan Cable is very large, almost reaching the ANSI/TIA-568-C.2 standard for Network Cable. specified maximum diameter. This requires people to use larger diameter pipes and hanging equipment to lay unshielded CAT6 Ethernet Cable, resulting in higher cable laying costs and larger space requirements. The advantage of unshielded Cat6 Patch Cord Cable is that there is no shielding layer and drain wire in the cable, the termination is simpler and more convenient, and it saves time. In addition, the price of unshielded Cat6 network cable is lower, and the price of the unshielded Patch Panel etc. used with it is also lower. Unshielded cabling systems do not require the entire cable to be shielded, just ensure that both ends are properly grounded. The advantage of unshielded network cable is that it is easier to terminate and install, and it is cheaper. If you value the termination and grounding system of the entire network system and its cost, you should choose unshielded network cable.

CAT6 Lan Cable Product Information:

1. Frequency – 250 MHz

2. Transmission Speed – 1 GB

3. Available Length – 305M ( 1000ft )

4. Condcutor- 23AWG (1-0.55~1/0.57) (America wire gague), bare copper or copper clad aluminum

5. Cable Construction – Shielded Or Unshielded 6. Jacket- PVC or LSZH or PE

7. Working Temperature: -15℃~+75℃

8. Install – Used indoor, in-wall and in the ceiling

Applications: Computers, routers, VoIP phones, IP cameras, printers, gaming consoles, routers, ethernet extenders, switch boxes, PoE, devices, etc..

The “Category Five” in the CAT5 Network Cable refers to five different quality levels set by the International Electrical Association for twisted pair cables. Since the information transmission speeds of the five quality levels are different, I will introduce the speeds of the CAT5E Lan Cable of unshielded twisted pairs below. According to international regulations, Cat5E Cable can be divided into Category 3, Category 4, Category 5, CAT6 Lan Cable, Category 5, and Category 6. The network speeds of different categories are different. Because the optical fiber of the unshielded twisted pair Ethernet Cable is wrapped with a layer of insulating colloidal material, the network cable is not susceptible to external interference and the transmission speed is relatively fast. Under normal circumstances, the transmission speed of a Category 5 network cable can reach 10 Mbps, such as Category 3, Category 4, and Category 5 can achieve such a network speed, while the three types of network cables such as Category 5, Category 6, and Category 6 can reach such network speeds. The transmission speed can be faster, like the fastest Super Category 6 network cable can reach 16Mbps, which is already a very high network speed.

CAT5E Lan Cable Product Information:

• 1. Frequency – 100 MHz
• 2. Transmission Speed – 1000BASE-TX
• 3. Available Length – 305M ( 1000ft )
• 4. Condcutor- 24AWG (1/0.5) (America wire gague), bare copper
• 5. Cable Construction – Shielded Or Unshielded 6. Jacket- PVC or LSZH or PE
• 7. Working Temperature: -15℃~+75℃
• 8. Install – Used indoor, in-wall and in the ceiling

Applications: Computers, routers, VoIP phones, IP cameras, printers, gaming consoles, routers, ethernet extenders, switch boxes, PoE, devices, etc..

The difference between Category 6 Network Cable and Category 6a network cable

1), Different transmission frequencies The transmission speed of Category 6a network cable exceeds that of Cat6 network cable. The transmission frequency of CAT6 Lan Cable is 250MHZ, which supports gigabit network speed, while the transmission frequency of Category 6 Patch Cable has been upgraded on Category 6 network cable, reaching 500MHZ, which supports 10 Gigabit network speed. This is the difference between the transmission frequencies of the two. 2), the outer skin identification is different Cat 6 cable are different from Cat6a cable. Generally speaking, the outer jacket of the cable will have the manufacturer’s information, cable logo and scale. The identification of Category 6 network cable is: cat6, and the identification of Category 6 network cable is: cat6a. In addition, the CAT6A network cable will be thicker, because CAT6A has two layers of shielding layers, and the core will be thicker at the same time, and CAT6 has a unique cross-frame structure. The thickness of the wire core is an important indicator that affects the transmission rate, which is generally proportional. 3), Different core conductors The conductor material of Category 6 unshielded network cable is 0.545±0.02mm, and the conductor material of other models and Category 6 super cable is 0.57±0.02mm. This is also the difference between the two, but because the gap is too small, the naked eye is divided by five points, so it is generally not judged from this aspect. 4), the price is different Cat6e cable is more expensive than cat6a. Generally speaking, 100m cat6e cable is about half cheaper than cat6e cable.

CAT6 Lan Cable Product Information:

1. Frequency – 250 MHz

2. Transmission Speed – 1 GB

3. Available Length – 305M ( 1000ft )

4. Condcutor- 23AWG (1-0.55~1/0.57) (America wire gague), bare copper or copper clad aluminum

5. Cable Construction – Shielded Or Unshielded

6. Jacket- PVC or LSZH or PE

7. Working Temperature: -15℃~+75℃

8. Install – Used indoor, in-wall and in the ceiling

Applications: Computers, routers, VoIP phones, IP cameras, printers, gaming consoles, routers, ethernet extenders, switch boxes, PoE, devices, etc..